Powerware 5119 User Manual download pdf (Page 39)

Powerware

5119 User’s Guide www.powerware.com

CHAPTER 8

TROUBLESHOOTING

This section explains:

UPS alarms and conditions

How to silence an alarm

Service and support

Audible Alarms and UPS Conditions

The UPS has anaudible alarm feature to alert you of potential power

problems. Use Table 11 to determine and resolve the UPS alarms and

conditions.

Silencing an Audible Alarm

To silence the alarm foran existing fault, press the button. If UPS

status changes, the alarm beeps, overriding the previous alarm silencing.

Table 11. Troubleshooting Guide

Alarm orCondition PossibleCause Action

The Power On indicator is

not on; the UPS will not

A circuit breaker or an input

fuse on the rear panel is open.

Push the circuit breaker button or replace the fuse (see “UPS

Rear Panels” on page 7).

start.

The line cord is not connected.

Connect the line cord.

The wall outlet is dead. Have a qualified electrician test and repair the outlet.

The UPS may be unable to

recognize a 100V, 50-Hz wall

outlet.

See “Specifications” on page 29 to verify that your UPS

accepts 100V nominal input.

Unplug the UPS. Start the UPS on battery and reconfigure the

nominal input voltage for 100V (see ”Configuration Mode” on

page 15). Turn off the UPS for 30 seconds. Plug the UPS into

the outlet.

A battery fuse or circuit breaker

is open.

Contact your service representative.

The UPS switches

frequently between battery

and AC input.

Input voltage in your area differs

from the UPS nominal.

Change the UPS input voltage to match your local voltage; see

“Configuration Mode” on page 15.

1 2 ... 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Powerware 5119 User Manual Page 39

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Powerware 5119