Powerware 5119 User Manual download pdf (Page 24)

Configuration

Powerware

5119 User’s Guide www.powerware.com

ExplanationPowerOn

Indicator

OptionLED

Shutdown Delay ON (default) 5-second delay before unconditional shutdown after the UPS receives a signal

from a computer via the communication port.

OFF 180-second delay before unconditional shutdown after the UPS receives a signal

from a computer via the communication port. When this LED is not enabled, the

user can also create a new delay time by reconfiguring the communication port.

See“Communication Port Configurations” on page 25 for more information.

AC Input Failure ON (default) Alarm sounds when there is an AC input failure.

OFF Alarm DOES NOT sound when there is an AC input failure.

Sleep Mode ON (default) When the UPS is on battery and the load is drawing less than 5% of the current,

the UPS shuts down the load. This feature conserves battery power.

OFF Select this option if you want a load less than 5% of the current to be protected

by battery power.

100/208V Nominal

Input Voltage

ON* Selecting this option changes the nominal input voltage on low voltage models

to 100V and to 208V on high voltage models.

*This is the default for factory-configured 100V or 208V models (see the rating

label on the UPS rear panel).

OFF (default) 100/208V is disabled; one of the other input voltage options is selected.

100/208V Extended

Voltage Mode

ON Select this option to extend the input voltage within -25% to +25% of 100V or

208V nominal input voltage before switching to battery (available on units that

were specifically ordered with this option).

OFF (default) The UPS accepts an input voltage within -20% to +20% of 100V or 208V

nominal input voltage before switching to battery.

Reset Defaults ON (default) All factory-set defaults are active.

OFF One or more factory-set defaults have been changed.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

No comments

Powerware 5119 User Manual Page 24