Powerware (4080 KVA) 9390 User Manual download pdf (Page 20)

UPS Installation Plan and Unpacking

2-2

Powerware

9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev C

2.2.1 Environmental Considerations

The life of the UPS system is adversely affected if the installation does not meet the

following guidelines:

쑺 The system must be in stalled on a level floor suitable for computer or electronic

equipment.

쑺 The system must be installed in a temperature and humidity controlled indoor area free

of conductive contaminants.

Failure to follow guidelines may void your warranty.

2.2.2 Preparing for Wiring the UPS System

For external wiring requirements, including the minimum AWG size of external wiring, see

Table E through Table H starting on page A-11. The power wiring connections for this

equipment are rated at 90°C. If wire is run in an ambient temperature greater than 30°C,

higher temperature wire and/or larger size wire may be necessary. Control wiring for

Emergency Power-Off (EPO) and optional accessories (such as building alarms and

monitoring interface) should be connected at the customer interface terminal blocks

located inside the UPS.

LAN and telephone drops, for use with X-Slot connectivity cards, must be supplied by

facility planners or the customer.

2.3 Inspecting and Unpacking the UPS Cabinet

The next step is inspecting and unpacking the UPS cabinet. The cabinet is shipped bolted

to a wooden pallet and protected with outer protective packaging material (see

Figure 2-1).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 205 206

No comments

Powerware (4080 KVA) 9390 User Manual Page 20