Powerware Ferrups FE/QFE 500VA User Manual download pdf (Page 30)

Electrical Installation

Powerware

FERRUPS FE/QFE UPS (500 VA–18 kVA) Installation Guide : Rev A www.powerware.com

Bypass Switches

Bypass switches are available in two types: external (a separate cabinet

that is wall-mounted) or internal (attached to the back of the UPS). The

bypass switch has three positions as described in Table 6.

Table 6. Bypass Switch Positions

Switch Position Description

LINE Connects the load directly to AC input power and disconnects UPS output.

AC input power is still connected to the UPS input.

OFF Disconnects the load from the UPS output power and AC input power.

UPS Connects the UPS output to the load.

NOTE In all three positions, AC input power is still connected to the input terminals

inside the UPS (once the UPS is installed). Use the AC disconnect switch (located on

the right side of the bypass switch) to disconnect AC input power during maintenance

or service.

Bypass switches may be MBB or BBM.

An MBB switch makes a new connection before it breaks the original

connection. For example, if you turn an MBB switch from UPS to LINE,

the bypass switch connects the load to AC input power before

disconnecting the load from UPS output power.

NOTE MBB switches are not for use with 208 Vac.

A BBM switch breaks the original connection before it makes a new one.

If you turn a BBM switch from UPS to LINE, the switch disconnects the

load from UPS output power before connecting the load to AC input

power.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

No comments

Powerware Ferrups FE/QFE 500VA User Manual Page 30