Powerware 5115 RM User Manual download pdf (Page 46)

UPS Maintenance

Powerware

5115 Rack-Mount User’s Guide : 164201449 Rev A www.powerware.com

Replacing Batteries

NOTE DO NOT DISCONNECT the batteries while the UPS is in Battery mode.

With the hot-swappable battery feature, UPS batteries can be replaced

easily without turning the UPS off or disconnecting the load.

If you prefer to remove input power to change the battery, press and

hold the

button for two seconds and then unplug the UPS.

Consider all warnings, cautions, and notes before replacing batteries.

WARNING

: Batteries can present a risk of electrical shock or burn from high short circuit

current. The following precautions should be observed: 1) Remove watches, rings,

or other metal objects; 2) Use tools with insulated handles; 3) Do not lay tools or

metal parts on top of batteries.

: ELECTRIC ENERGY HAZARD. Do not attempt to alter any battery wiring or

connectors. Attempting to alter wiring can cause injury.

: Replace batteries with the same number and type of batteries as originally

installed in the UPS.

CAUTION

Pull the battery group out onto a flat, stable surface. The battery is unsupported when

you pull it out of the UPS.

Use the following steps to replace the batteries:

1. Pull the left side of the front panel to release the snaps to the

left and middle of the panel. Remove the front panel from the

right side.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 57 58

No comments

Powerware 5115 RM User Manual Page 46