Powerware 5115 RM User Manual download pdf (Page 41)

Powerware

5115 Rack-Mount User’s Guide : 164201449 Rev A www.powerware.com

CHAPTER 6

COMMUNICATION

The Powerware 5115 RM has flexible communication options for local,

network, or remote monitoring and management. You can use the USB

port or the DB-9 communication port to connect your computer to the

UPS. The X-Slot communication bay is also available for additional

connectivity options.

NOTE Select only one method for communication. If an X-Slot card is installed, the

USB and DB-9 ports are disabled. If an X-Slot card is not installed, be sure that only

one port (USB or DB-9) is connected to the computer.

USB Port

The UPS can communicate with a USB-compliant computer using

LanSafe Power Management Software (v4.15 or higher).

To establish communication between the UPS and a computer:

1. Connect the USB cable to the USB port on the UPS rear panel.

Connect the other end of the USB cable to the USB port on your

computer.

USB Port

Figure 18. The USB Port

2. Install the LanSafe softw are and USB drivers according to the

instructions provided with the Powerware Software Suite CD.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

No comments

Powerware 5115 RM User Manual Page 41