Powerware 9 User Manual download pdf (Page 63)

Powerware

9PrestigeSeriesUser’sGuide (600 VA-1800 VA) www.powerware.com

CHAPTER 7

TROUBLESHOOTING

The Prestige UPS is designed for durable,automatic operation and also

alerts you whenever potential operating problems may occur. Use the

following troubleshooting chart to determine the UPS alarm condition.

Unlit

Amber

Green

Flashing

Indicator Legend

Condition PossibleCause Action

UPS does not turn on.

UPS is not plugged in. Plug UPS into working outlet.

Dead wall socket. Test wall socket, repair as required.

UPS circuit breaker is tripped. Reduce load, then reset breaker. If you are

using a PowerPass, reset the breaker using

a pencil through the circuit breaker (CB1)

access hole.

PowerPass circuit breaker is

tripped.

Reset breaker.

Load does not turn on. UPS has not been activated.

Press the Output On button for one

second, then release.

UPS beeps occasionally. Normal operation. None. UPS is protecting your equipment.

UPS circuit breaker trips. Load fault. Check the load.

Disconnect faulty load equipment.

Wait several minutes before resetting the

UPS circuit breaker. If you are using a

PowerPass, reset the breaker using a

pencil through the circuit breaker (CB1)

access hole.

Restart the load.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 69 70

No comments

Powerware 9 User Manual Page 63