Powerware 9335 User Manual Page 23
- Page / 100
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Powerware 9335 (80 kVA and 120 kVA) Installation and Operation 2-5
164201396 REV A 071103
2.
Remove Customer Interface conduit landing plate from the UPS cabinet. Drill or
punch conduit holes for interface wiring.
3. Open UPS cabinet front door and remove the front safety shield panel to gain access
to the wire way to bring wires from the conduit landing panel at the bottom rear of the
cabinet.
4.
Locate required connection points by referring to Figure A–1 in Appendix A.
5.
Refer to Appendix A of this manual for wiring and termination requirements.
6.
Reinstall Customer Interface conduit landing plate.
7. Install conduit and wiring.
8. When wiring is complete, secure UPS by reinstalling all panels removed in previous
steps.
2.3 Battery Cabinet Installation
The Powerware 9335 has no batteries within the UPS cabinet. An external battery
cabinet with appropriate batteries installed is required for proper system operation.
See installation instruction provided with the battery cabinet for proper installation of that
portion of the system.
2.4 Initial Startup
Startup and operational checks should be performed only by authorized service
personnel. Contact service in advance (usually a two week notice is required) to reserve
a preferred startup date.
2.5 Completing the Installation Checklist
The final step in installing your UPS system is completing the following Installation
Checklist. This checklist ensures that you have completely installed all hardware,
cables, and other equipment. Completing all items listed on the checklist will ensure a
smooth installation. You should make a copy of the Installation Checklist before filling it
out, and retain the original.
After your installation is complete, a service representative will be able to verify the
operation of your UPS system and commission it to support your critical load. The
service representative cannot perform any installation tasks other than verifying software
and operating setup parameters. Service personnel may request a copy of the
WARNING:
It is very important to ensure that a proper protective device is installed
between the battery system and the UPS DC input terminals. See Tables A
and B in Appendix A for proper wire and protective device sizing.
- Table of Contents 4
- Section II Operation 5
- 164201396 REV. A 071103 10
- 164201396 REV. A 071103 11
- Safety Considerations 12
- Getting Help 12
- Section I 13
- Installation 13
- Getting Started 15
- 1.1.2 Preparing Your Site 16
- 164201396 REV A 071103 17
- Cabinet from the Pallet 20
- 2.4 Initial Startup 23
- Installation Checklist 24
- EMERGENCY OFF 27
- X1 UPS 28
- TWISTED 28
- WIRES (2) 28
- Section II 29
- Operation 29
- 164201396 REV A 071103 30
- Understanding UPS Operation 31
- 164201396 REV. A 071103 33
- 5.2.1 Normal Mode 34
- 5.2.2 Bypass Mode 36
- 5.2.3 Battery Mode 38
- Maintenance Bypass Mode 40
- 5.3.5 Static Bypass 42
- 5.3.6 Maintenance Bypass 42
- 6.1 General 43
- 6.2.1 Control Panel 44
- 6.3 UPS Standard Features 45
- 6.4 Options and Accessories 46
- 6.5 Safety Considerations 47
- the Control Panel 49
- 7.2 Using the Control Panel 50
- 7.2.3 Pushbutton Functions 51
- 7.3.1 Status Screens 52
- • HH-MM-SS 53
- PERFORM 53
- 7.3.3 Main Menu Screen 54
- 7.3.4 Event Log Screen 54
- 7.3.5 Measurements Screen 54
- SET-UP USER 54
- SET-UP SERVICE 54
- 7.3.6 Commands Screen 55
- 7.3.7 UPS Data 56
- 7.3.8 Set-Up User 56
- 7.3.9 Set-Up Service 57
- 7.4 O perating Modes 58
- Instructions 61
- 9.1 Alarms 67
- Communications 69
- Control Panel 70
- 11.1 Generator ON Facility 73
- 12.1 General 75
- 13.3 UPS System Output 78
- 164201396 REV A 07/11/2003 79
- Powerware 9335 – 80 kVA 80
- Powerware 9335 – 120 kVA 81
- During Full Load Operation 87
- 164201396 REV A. 071103 100
Related products and manuals for Tools Powerware 9335
Tools Powerware BladeUPS none User Manual
(32 pages)
(32 pages)
Tools Powerware 5140 User Manual
(68 pages)
(68 pages)
Tools Powerware 9 User Manual
(70 pages)
(70 pages)
Tools Powerware 9170+ User Manual
(12 pages)
(12 pages)
Tools Powerware 9170+ User Manual
(94 pages)
(94 pages)
Tools Powerware 9155 UPS20-30kVA User Manual
(52 pages)
(52 pages)
Tools Powerware 9330 User Manual
(246 pages)
(246 pages)
Tools Powerware 5110 User Manual
(14 pages)
(14 pages)
Tools Powerware 5105 User Manual
(4 pages)
(4 pages)
Tools Powerware UPS 1000 - 2200 User Manual
(24 pages)
(24 pages)
Tools Powerware 5075 kVA User Manual
(162 pages)
(162 pages)
Tools Powerware 9125 User Manual
(30 pages)
(30 pages)
Tools Powerware 9150 User Manual
(64 pages)
(64 pages)
Tools Powerware 9120 User Manual
(24 pages)
(24 pages)
Tools Powerware 9155 User Manual
(10 pages)
(10 pages)
© 2020, manymanuals.com. All rights reserved. | 1.346 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals